Changing A Bathtub Drain Stopper
The bathtub drain explained most of the bathtub drain is hidden underneath the floor and behind the tub wall and you usually have to remove some drywall or floorboards to access it.
Changing a bathtub drain stopper. Undo the screw holding the extension bar and lift out the drain stopper. And if you have an old style tub with a rubber stopper held by a chain a built in stopper drain fitting will modernize your fixture. When the stopper in your lever style bathtub drain won t pop up anymore because the linkage is damaged or clogged replace it with a much simpler lift and turn style tub drain. This stopper operates using a plunger in the tub overflow pipe which moves up and down to close and open the tub s drain pipe.
Unlike the other type of bathtub drain stoppers on our list it can be confusing when you want to take out the stopper for cleaning. The linkage in a lever style drain attracts dirt and hair like a magnet and must be cleaned regularly in order to keep the drain working properly. If you want to replace a trip lever mechanism with a different type of stopper however you usually need a new bathtub drain flange. The plunger is connected to the trip lever employing a connecting rod found inside the overflow tube.
Knowing how to remove a bathtub drain is a helpful skill for when you need to deep clean the drain replace the drain entirely or remove the bathtub. Trip lever drain stopper. They are more durable and easier to maintain than pop up stoppers that operate by linkage running through the overflow tube. A tub tub drain with a built in stopper has distinct advantages over other types of drains.
Here a strainer replaces a visible pop up stopper in the drain opening. If your tub does not have a trip lever it is either a toe touch push pull flip it presflo or a lift and turn style stopper these stoppers operate without a trip lever mechanism and are generally the easiest kind to remove or replace since they do not require the removal of the trip lever. How to identify which stopper you have. The trip level stopper stands as one of the models that have levers on the overflow plate in front of the bathtub.
After that unscrew the nut holding the angled rod and pull it off. Then undo the clamp that connects the bar to the angled rod that enters the drainpipe by pinching and separating it.